basis THIS Bandito is the section in our size. 158/164.
cut back normal.
cut kangaroo pocket on the fold 2x.
take longer arms around the cuffs and the length of dashes for the thumb holes from small Pellwormschnitt.
front see photo:
with a pitch angle to the straight line in Draw yarn 16cm from the tip.
twisting or
the front document 2x and cut the front edge with the addition of 3 cm with 1cm seam allowance here then are already there.
Similarly, the outer fabric hood 2x, here in front of the narrow edge of 3cm.
Hood Lining 2x here is extended from the center of the hood down now, so with my shirt, next time I would cut the inner hood 2x (not 3cm front edge forgotten) and the front document as shown in the section. Sits still determined optimum.
Assembly: plug
The upper front section on the front, while the middle Maki before, the two parts must be evenly overlap approximately 3cm.
respect, only 10 - 15 cm on each side sew which remains stuck in the middle only. The sleeves combine with front and back, then sew together the previously stitched hood.
The upper front section on the front, while the middle Maki before, the two parts must be evenly overlap approximately 3cm.
respect, only 10 - 15 cm on each side sew which remains stuck in the middle only. The sleeves combine with front and back, then sew together the previously stitched hood.
The inner hood with the two inner slip joint (right sides).
Now the inner to the outer hood hood Sew right sides in a step
now meet the evidence. All and press the edges turn out beautiful. Now I have stitched the hood with a nice trick.
So then as a project turn back the inner hood combined with the outer hood, so that the seam of the back and hood is covered.
So then as a project turn back the inner hood combined with the outer hood, so that the seam of the back and hood is covered.
The hood evidence envelope and sew over it again. Locker stuck. Now the front zuendenähen by the evidence now 2cm overlap with the closing of the front seam. The seam side down and stitch across the front length. Now connect the internal documents with a decorative stitch to the front part, can also be left open.
The thumb holes are working the arm and side seams in one go, sew the cuffs, snaps or buttons and attach your completed Hoody is the way I imagine.
I wish you much fun sewing this hoody's from Bandito + Klein Pellworm
with my extra performance.
with my extra performance.
glad the sweater may be reworked for private use, my instructions will not be sold or standard copies, please contact us take with me.
She is my property, I hope the honesty of the creative people.
Thanks and best regards Heike
course, all reports provided without warranty and guarantee for problems you
She is my property, I hope the honesty of the creative people.
Thanks and best regards Heike
course, all reports provided without warranty and guarantee for problems you
0 comments:
Post a Comment