Stifterolle converted into a knitting needle roll
guidance of the great rocker Keith has inspired me to a role for my needles and crochet needles to sew.
Friday, October 30, 2009
Build Boat Side Console
slipped out but as they have in the first prototype of Max showed the scissors I have always thought about it with a flap above incorporate.
The Vilene I turn sewn directly to the part with the slots for the needles to ensure that, nothing inside slip. Before everything comes together near the door now, Cut 2cm narrower than the pins role is broad, the height is you leave yourself, for my next role I will take pins 22cm. This piece of fabric folded right sides together and sew along the sides. contact on the right and stuck up on the edge of the lower section with 2 cm distance to the sides. In is now right to rake the later outer part. All together, sew and make up an approximately 10-15cm wide piece open.
cut corners and turn. The opening is stitched directly supplied with, when the door is now tacked onto attachments section.
fix now wish to push buttons on the corners of the flap and finished the knitting needle roll.
Heike
- complemented by rocker pins roles Kerstin.näht with my ideas
Thursday, October 22, 2009
Christina Aguilera Squeezing Boobs
details collar from the Bizzkids Winter 2004 Model 2712a
Figure 1
because I was approached many times before on the collar I have the processing of the collar in pictures noted.
For all those who still Bizzkids the winter of 2004, it is the collar of the model on page 12 2712a
Figure 1
length: 25cm; the fold 6cm widest point and 6.8 cm forward about running out.
either 2x or cut on the fold in 4 different parts, in any case, plus seam allowance. Here I have sometimes on it was embroidered, sew together before, it does not scratch.
The collar is finished off on the bow and sewn together - from the left.
Figure 2
The collar is turned right side out, on request you can stitch it.
Figure 3
In the neck opening, I Maki now the rear and center front, the collar right sides together with pins fixed front so let desired overlap, in this case it was about 7cm overlap. So from the middle 3.5 cm right and left. overcasts
With Ovi and then an additional seam.
Figure 4
collar from the left seam with a zigzag stretch.
Figure 5
DONE
for me I extend the collar just about 8-10cm in width.
greetings Heike
PS if you do not understand what - emailed me to ask.
cutting template collar from the Bizzkids Winter 2004 Model 2712a
Subscribe to:
Posts (Atom)